Keg Dispensing Supplies

For years, Taprite has been a trusted name in the beverage industry. Known for their high quality, Taprite provides an array of wonderful dispensing equipment. Now, Great Fermentations is proud to bring you Taprite brand nitrogen regulators. These dual guage regulators have a male thread and mount to high-pressure nitrogen tanks with a CGA-580 valve. One guage shows output pressure and reads from 0 to 60 PSI, while the other shows remaining pressure. Output pressure is adjustable, and can be read on the output guage. The regulator features a 3/8" O.D. barb with a shutoff valve to connect to your gas system, as well as a non-adjustable safety blow-off set for 55-65 PSI. With this regulator, you will be nitrogenating and serving beautiful beer with the tell-tale cascade of nitrogen bubbles in no time!

If you have a Perlick lever sanke coupler with bad shaft o-rings, we've got you covered! These fit in the shaft of the Perlick lever coupler, stabilizing the shaft and allowing complete functionality. Have a few extras on hand just in case!

Most often used for CO2 connections, these quick disconnects are chrome-plated brass. This is the male side, which has a 3/8" straight barb on one end, while the other end is male andfits into the female end. It has a temperature tolerance range from -40 to 180F and a vacuum pressure tolerance of 120 PSI. This male piece is used with the female piece #04P01-111

Beer shanks to make all your dispensing dreams come true! These chrome plated brass shanks are used in a variety of setups to create draft systems. A 3/16" bore is perfect for liquid dispensing of all types, including sweet sweet beer. This 5" shank (actual measurement: 5 1/8") is slightly longer than the standard 4" shank and works when you need just a little more length. Simply drill out your hole, place your shank through, and lock in place with the included lock nut. A faucet can then be attached to the outside of your draft setup, whether it be a kegerator, keezer or jockey box! Also needed on the inside is a 3/16" tailpiece, neoprene beer washer and beer nut.